EagleTree MicroPower E-Logger
NEW: Eagle Tree continues to innovate in data collection with the eLogger V3. In addition to greatly enhanced resolution and accuracy, the V3 now supports voltage to 70 volts, current to 100 amps (150 amps optional), GPS (with optional GPS Expander), 5x the logging capacity of the V2, Three Temperatures, and Throttle Logging (or logging of two RPMs)!
Here are the key features of the MicroPower:
Logs pack current to +/- 100 amps and voltage from about 4.5 volts to 45 volts
Current is measured with a true Hall Effects Sensor – NOT a resistance shunt!
Great for bench monitoring of battery charging also!
NEW: Accepts optional inexpensive sensors for Temperature, RPM (brushless, magnetic or optical), Airspeed, Altitude, Servo Current, Throttle Movement, and more, available below
All data is logged to permanent memory, which retains the data even when the power is removed
Software computes Wattage, mAH, etc. for complete e-flight data.
Fully Compatible with Windows Vista, 98SE, ME, Win2K and XP?
Integrated USB with included cable (NOT a USB to serial port cable like other loggers)
Supports simultaneous Temp and RPM sensors, or two Temps
Weighs about 0.5 oz (17 grams). Version with Wire Leads weighs slightly more.
Supports USB Live Mode, which lets you see whats happening in the model LIVE on the bench, on your PC
Adjustable logging rate (1-10 samples/second) and lossless data compression for long log times
Comes with our state of the art Windows virtual playback display and graphing
Powerful Graphing software has advanced charting features, such as amps vs volts
Internet Updatable firmware – as we add new features or (heaven forbid) have a firmware bug, the update is just a download away! No need to ship hardware back and forth.
New GPS Expander Module based on the latest GPS technology. Built-in LED which indicates 3D fix. Fast 10Hz update rate. Built-in battery backup for quick fixes.
Plugs into the eLogger V4 to provide live and/or recorded lat/lon, ground speed, GPS altitude, distance to pilot, course, UTC timestamp, and more. Integrated display/3D graphing software included in data system. WAAS and EGNOS compatible, built-in patch antenna.
NOTE: if you plan to use the GPS with your eLogger with 8S (approximately 30V) packs or higher, the Battery Backup Harness (CAB-BAT-BACK) is required.
A fully adjustable 3 channel-out Servo Regulator which can be used on any receiver channel and will increase the servo travel time, direction and duration. Great for scale model retracts flaps and canopies where scale detail and flight characteristics are important. No more ((boing!)) cartoon like landing gear action.
Input: 1 servo Channel.
Output: 3 Channels.
Options: Travel Speed & Travel Time in both directions.
Compatible with both Digital and Analog systems
Minimizes rudder trim changes caused by wind, other meteorological changes, and varieties of helicopter attitude changes are automatically canceled.
Sensor vibration proofing
Simple sensitivity adjustment
Digital proportional RIC system
Operating voltage: 4.8V ~6V( common for receiver)
Operating temperature: -lOL r-.rf-45 C
Dimensions: 28x28x20 mm
Operating current: 80mA
The TURNIGY watt meter is a very accurate R/C amp/watt meter.
Predict model airplane flight time with any given propeller.
Ensure peak currents are safe for motor, ESC, wiring and connectors
Check battery health and performance.
Evaluate R/C battery charging efficiency.
Choose the best propeller or gearing and the most efficient motor
Check for wiring and connector power losses
Measure power and energy consumption of ANY device with a battery