FMA Co-Pilot 2-Channel Flight Stabilization System

June 8, 2010 Leave a comment

The FMA Direct Co-Pilot™(PN CPD4) Flight Stabilization Unit (FSU) is a patented system that senses the difference in infrared signature between the earth and the carbon dioxide in the atmosphere to provide 100% real time, day or night stabilization about two axes on any model. Its action may be visualized as the equivalent of a string tautly stretched between the center of the earth and deep space on which the model is constantly held so that it can not turn downward unless commanded. This new technology will revolutionize the training of R/C pilots for airplanes, helicopters, and gliders. Every club and every RC hobby dealer will want one to increase the number of successful pilots and reduce the number who crash their ARF/RTF trainer, never to return to the hobby. The sticks can be used normally to command the model through any maneuver it is capable of, yet, the moment the sticks are centered, the model immediately rights itself, even from inverted flight. Buddy boxes will no longer be needed as Co-Pilot has proven to be the most effective way possible to train new flyers and to assist all flyers. The instructor no longer needs a transmitter.
If you use the CPD4 Co Pilot with a Futaba PCM receiver, FMA Direct recommends the 605SB servo buffer (installation instructions included with the CPD4 manual)
4 Sensor, 2 Axis Infrared Thermo-technology Flight Stabilization System maintains level flight for aircraft and heli. Stabilizes pitch and roll for almost any R/C aircraft. The CPD4 does not handle CCPM helicopters or aircraft configurations that include differential ailerons or flapperons.

Dealer

ASW28 Fibreglass Glider

March 29, 2010 Leave a comment

Dealer

Beautifully finished, this faithful replica of the famous ASW28 sport glider is an excellent performer and is superbly attractive with its mirror finish gel-coat fibreglass frame making it also very agile and efficient.

DG-1000 Fibreglass Glider

March 29, 2010 Leave a comment

Dealer

This stunning fibreglass moulded 2.63M glider is modeled from the well known Flugzeugbau DG-1000 two seater sport glider.

Predator UAV 74in Spy Plane ARF

March 29, 2010 Leave a comment

Dealer

TM Predator UAV 74in Spy Plane ARF
Its time to scare your neighbours and put fear into hearts of any illegal immigrants or would-be terrorists.
The TM-Predator scale model is as easy to fly as it is awe-inspiring to watch circle above, easy to build, this is an excellent park flyer. Set it up with a 400 size or 150-200W motor with a pusher prop and you have a stable flying topic of discussion at your next club day.
Watch people run for cover in fear of a pending missile attack with the TM Predator!
Model comes with detailed instructions.

Turnigy 380MG Micro Servo

March 29, 2010 Leave a comment

Dealer

Turnigy 380MG Micro Servo (Metal Gear) 3.6kg / .15sec / 15.6g
This servo is designed to be used in R/C glider applications. Increased width, carbon nylon gears and very precisely machined teeth make the gears strong and smooth. Output spline is the same as Futaba 25 tooth, so all Futaba type horns can be used.
This servo comes with JR/Hitec S Connector also known as a “Universal Connector”. Even thought this servo comes with JR/Hitec S Connectors, this servo is electrically compatible with Futaba receivers.

1. Metal gear
2. curve gear with smooth.
3. M9.6 ball bearing (si-oil)
4. Extra Strong torque with low signal affect and success get CE certification.
5. Rubber fitting case for waterproof
6. Designed to be used in R/C glider applications.
7. Same with Futaba 25 tooth spline

Turnigy Accucel-8 150W 7A Balancer/Charger

March 29, 2010 Leave a comment

Dealer

The Accucel-8150 is a Lipoly/LiFe battery charging workhorse. Capable of handling up to 8S, 7A or a maximum of 150W charging current plus it balances and discharges packs which is critical for keeping your expensive batteries in perfect condition.
This charger has a 12v input and can be used with a mains 12v power supply or your car battery when at the field.
TURNIGY Accucel chargers are built with quality components and produced in robotic pick-n-place SMT technology machines to produce a reliable and accurate charger.
You wont find a better priced quality 8 Cell charger!

The Accucell has various programming and charging modes and will accept and safely charge NiCd,Lilo, Lipo, LiFe, Pb batteries.

Eagle Tree Video OSD Pro Expander

March 29, 2010 Leave a comment

Dealer

An exciting and creative way to include data in your flight videos.
Eagle Tree OSD Pro system is completely modular.
Simply use your eLogger or Data Recorder, the OSD Pro Expander, and any additional sensors you want to display.

The OSD Pro is a powerful, modular, fully configurable Video/Audio On-Screen Display (OSD) device, providing graphics, voice announcements, alarms, acoustic variometer with total energy compensation, Home Arrow, Return to Home, Failsafe, RADAR, waypoints, a flight simulator for testing, and many other features.    The information displayed can be as simple or advanced as you like, depending on how you configure the display, and on which optional Eagle Tree sensors are connected.

All parameters available with the eLogger V3 and Data Recorders + optional sensors will be supported for display on the OSD Pro.
Here are some examples:
GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed,Course, and more)
Electrical Parameters (Pack Volts, Amperage, RX Volts, Servo Current, Milliamp-Hours, Watts)
Performance Parameters (Airspeed, Barometric Altitude,  Climbrate, Variometer,Temperatures, RPM, G-Force, EGT, Jet ECU Status, servo positions)
Receiver Health (Dropped Frames, Antenna Fades, Missed Packets requires Spektrum or JR FlightLog compatible Receiver)
Call Sign, and many more

Follow

Get every new post delivered to your Inbox.